Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block

Order the Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block today and save.

The Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block is is perfect for all trades including the DIY handyman.
Now offered this week throughout Australia at seasonal special discounted price, this guarantees that you always get the best quality tools at the lowest prices.

Now selling at $2699.00

ORDER NOW

Prices are changing daily so see specials today.

See Checkout for stock availability

Disclosure:
Thank you for your support. Please note may earn a small commission on your purchase from our supplier. This does not affect the price in any way.

The Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block is perfect for all trades including the DIY handyman. Biggest Range of the Best Brands from one of Australia’s Leading Online tools and Hardware store.

Now offered throughout Australia at a seasonal discount, this guarantees that you get the best quality tools at the lowest prices.

Specifications:

Get the Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block and save. Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah eLITE Lithium Battery, ePRO Plus Battery Monitor & Fuse Block, 5 Year Warranty. Introducing Enerdrives RV Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more. Enerdrive have created many different layouts to fit nearly every possible application. Designed for the DIY handyman with basic electrical knowledge through to the professional looking to save installation time. You can choose kits ranging from 20A AC & 40A DC chargers through to 40A AC & DC units with monitoring and Low Battery Cutout. These kits are all pre-wired by Enerdrive where possible to keep the kits simple to install. All RV boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application. Enerdrive also have you covered from a service and support angle with the RV Installation kits. Designed, constructed and pre-wired by Enerdrive, we know exactly the layout and wiring of your kit so any fault finding or support can be given quickly and concisely. PRO TIP : Common accessories to go with this canopy system are; one or two AGM Board Cable Kits. Thickness, length & quantity will depend on installation type. Please check products cable description for details. RV60 Kits Includes: K-RV060 K-RV060-01 K-RV060-02 K-RV060-03 ePOWER AC 20Amp 230v Charger * * * * ePOWER DC2DC 40+ Charger (Vehicle/Solar) * * * * ePRO Plus 500A Battery Monitor with Remote Display, with Audible & Visual Alarm * * * ePOWER AC Charger 30A Output Fuse Connection * * * * ePOWER DC2DC 60A Output Fuse Connection * * * * 50A Load Output Fuse Connection * * * * 8 Circuit “Wedge” Fuse Block * Low Battery Cutout (Programmed in ePRO Plus via Users Data Input) * 12mm Black Plastic Mounting Board. Water & Rot Resistance * * * * Dimensions (LxWxD) mm 480 x 400 x 100 480 x 400 x 100 480 x 400 x 100 480 x 400 x 100 (*) Indicates Standard Fitment RV60 Wiring Diagram: RV60-01 Wiring Diagram: RV60-02 Wiring Diagram: RV60-03 Wiring Diagram: Enerdrive ePOWER 12V 40A DC to DC Battery Charger: Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems. The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. 12V 40A DC2DC Battery Charger Features Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile 40A output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included in charger for more accurate battery charging For In Vehicle & Marine Wiring Diagram, click below: For Towed Vehicle Wiring Diagram, click below: Enerdrive ePOWER 12V 20A Battery Charger : The Enerdrive ePOWER 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). 20A Battery Charger Features: Multistage Charging: Fully automatic multistage 20A battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. Enerdrive ePRO PLUS Battery Monitor: The ePRO PLUS is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products. This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4). The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored. The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the QuickLink cable are both included in the package, avoiding the need for a separate connection kit. Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with Enerdrive DC Modular products Blue Sea ST Blade Compact Fuse Blocks – 8 Circuits: Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. Ignition protected when cover is secure –meets ISO 8846 and SAE J1171 for use in a gasoline engine compartment Single side design allows wire entry from one side to minimize footprint Insulating cover meets ABYC/USCG insulation requirements Tin-plated copper buses and fuse clips Accepts ring or snap fork type terminals Includes 8 write-on circuit labels Fuses sold separately Enerdrive ePOWER 12/24V 40A Low Battery Cutout IP66 : The ePOWER Low Battery Cutoff protects your batteries from non essential loads before the battery is completely discharged causing damage to batteries and potently denying your engine cranking power. These Low Battery Cutouts also protect connected electrical appliances against over voltage. The voltage load is disconnected whenever the DC voltage goes beyond 16V (12V mode) or 32V (24V mode). Microprocessor Controlled: The ePOWER LBC is microprocessor controlled with 10 different programs that engage or disengage the voltage load over several different voltage paramaters. Features: Overvoltage Protection Ignition proof (no relay, no spark) Delayed alarm output Delayed load disconnect Applications: Recreational vehicles Service vehicles Maritime applications Enerdrive eLITE 12V 100Ah Lithium Battery. The new Enerdrive 12v 100Ah eLITE Lithium Battery has been designed as an “entry level” lithium battery for the customer who wants to get into the lithium market without haveing to spend big. This unit is a stripped back version of the ever popular 100Ah B-TEC Lithium battery but, without all the bells and whistles. Wireless Battery Monitoring Technology, not in this little beauty. To save costs, we decided to remove the monitoring option from the eLITE. Does this reduce the quality of the battery?, certainly not. Its all about offering a high quality battery at an entry level price. The battery comes with both battery a tray and straps to ensure the best stability and user function of the Enerdrive eLITE 100Ah battery. Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities; 100Ah Lithium = 160Ah AGM 125Ah Lithium = 200Ah AGM 200Ah Lithium = 320Ah AGM 300Ah Lithium = 480Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The Enerdrive eLITE battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The Enerdrive eLITE battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications. Please Note; The eLITE battery is capable to be paralleled to a second eLITE battery of the same size. For maximum performance and lifespan of your eLITE battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS. The 100Ah battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery. If you are requiring a battery system larger than eLITE, please look at the ePOWER B-TEC battery range or the Enerdrive Pro Series Power Pack Systems of which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack. Shop at the best prices and enhance your skills at the same time with this Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block by using the right product for the job. From our Power Systems division.

Promotion:

Shop for the best quality tools.

At prices to suit every budget. We are Stockist and Agents for Enerdrive branded products in Australia and have many more great offers on sale for you to choose from.

See Checkout for stock availability

Check Stock

✓ Offered on sale.

TheEnerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block is offered on sale at a special price representing great value.

✓ Proudly Australian owned and operated.

✓ Shipping.

Delivery fees (where applicable) will be calculated based on the size and weight of the item as well as the location of the delivery. The fee will be displayed during the checkout when the post code for the destination is entered.

✓ Generous Exchange Policy.

Exchanges accepted. See checkout for Exchange and Returns detail.

✓ Stock.

Check stock and available now while stocks last. See checkout for details.

✓ Manufacturers Warranty.

All Enerdrive products come with a full manufacturers warranty.

✓ Everyday Specials.<

Big Brands, Everyday Low Prices with Special Discounts on selected items.

See our full range of Enerdrive Products here

---

Name: Enerdrive 20A AC & 40A DC RV60 DIY Installation Kit, With 100Ah B-TEC Lithium Battery, ePRO Plus Monitor & Fuse Block
Price: lock in your special price today
Currency: AUD
Stock: Check Stocks

---

Shop with confidence at toolmaster.com.au official stockists of Enerdrive products where only the finest quality tools and equipment are supplied and delivered direct to your door by our wholesale supplier.
We are one of the fast-growing online retailer of DIY, home, garden and outdoor machinery products Australia Wide.
If you are happy with your purchase, tell a friend, if not tell us.

Ref:45738

---