Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine

Order the Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine today and save.

The Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine is is perfect for all trades including the DIY handyman.
Now offered this week throughout Australia at seasonal special discounted price, this guarantees that you always get the best quality tools at the lowest prices.

Now selling at $5905.00

ORDER NOW

Prices are changing daily so see specials today.

See Checkout for stock availability

Disclosure:
Thank you for your support. Please note may earn a small commission on your purchase from our supplier. This does not affect the price in any way.

The Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine is perfect for all trades including the DIY handyman. Biggest Range of the Best Brands from one of Australia’s Leading Online tools and Hardware store.

Now offered throughout Australia at a seasonal discount, this guarantees that you get the best quality tools at the lowest prices.

Specifications:

Get the Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine and save. Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine, 5 Year Warranty. Pack Includes: Enerdrive ePOWER B-TEC 300Ah Lithium Battery, EPL-300BT-12V-G2 Enerdrive DC2DC Battery Charger – 12V 40A, EN3DC40 Enerdrive, ePOWER 12V 60A AC Fully Automatic Multistage Battery Charger, EN31260 Enerdrive ePOWER 2000W 12V Pure Sine Wave Inverter with RCD & AC Transfer Switch, EN1120S-X Simarine Pico+ Display Panel Mount Black, SI-PICO-3 Simarine Battery Shunt 300A 2 x Volt 2 x Resist 1 x Temp, SI-SC303 Simarine by Enerdrive Quad Shunt Mod 4 x 50A Input Current & 1 x Relay Output 1A, SI-SCQ50 Enerdrive ePOWER B-TEC 300Ah Lithium Battery. Available in 12v 300Ah capacity, the Enerdrive B-TEC G2 lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity. Key Features: New design BMS Max discharge current 250A (15mins) – 200A continuous Max charge current 190A (30mins) Can be connected in parallel (up to 4 batteries) Built in flat battery reset button Includes mounting tray and 2 straps Communication ports (RS485) for future integration 5 year warranty & lifetime tech support Smart Phone Monitoring System The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information; Battery Capacity Battery Voltage Battery Current (Amps) Battery State of Charge (SOC) Battery State of Health (SOH) Battery Status Individual Cell Voltage Battery Temperature Battery Cycles Battery Alarms Battery Event Information Battery Management System The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Size & Weight Savings Lithium v AGM Capacities: 100Ah Lithium = 160Ah AGM 125Ah Lithium = 200Ah AGM 200Ah Lithium G2 = 320Ah AGM 300Ah Lithium G2 = 480Ah AGM (Based on standard depth of discharge for both Lithium (80%) and AGM (50%). The Enerdrive B-TEC G2 battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative. The Enerdrive B-TEC G2 battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity. The New Generation 2 B-TEC So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look. Dimension Original Generation 2 Length 519mm 521mm Width 273mm 280mm Height 222mm 253mm Also included for free is a metal battery tray and hold down strap to complete the installation process. The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery. The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording. The New Enerdrive Generation 2 (G2) B-TEC 300Ah Lithium Battery now comes with a 5 year warranty, giving you peace of mind that this product will keep you covered. With over 8 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup. With over 4000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications. Please Note; The G2 battery is capable to be paralleled to a second G2 battery. For maximum performance and lifespan of your G2 battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS. The G2 300Ah battery is able to accept a maximum inverter capacity of 3000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery. If you are requiring a battery system larger than the Enerdrive B-TEC G2 battery, please look at the Enerdrive Pro Series Power Pack Systems which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.   Enerdrive ePOWER 12V 40A DC to DC Battery Charger. It designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems. The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads. 12V 40A DC2DC Battery Charger Features Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile 40A output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included in charger for more accurate battery charging PRO TIPS: Common accessories to go with this DC to DC charger are the 60Amp & 70Amp breakers, also the 3 pre-wired & fused charging cables. These are available in the Accessory List above to add as optional extras, please see the product manual & drawings for the connection. You will require a ratchet crimping tool for this cable kit. PLEASE CLICK HERE to find our tool range. Multistage Charging Process The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries. The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array. As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages. Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible. Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge. Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply. Smart Charging Feature The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so. Maximising your Solar Harvest using the DC2DC+ The Solar Input on the DC2DC+ unit has a maximum rated INPUT current of 30amps. This means it is optimised for using higher voltage ‘grid’ type modules for best output performance. The maximum achievable output using standard 20Voc solar modules will be approx 35amps @ 14.4Vdc. Panel Array Rated Wattage & Volts Open Circuit Rating Estimated DC Amps Output (## See Below) 1 150watt @ 20Voc 150watts 10 1 200watt @ 43Voc 200watts 13 2 150watt @ 20Voc 300watts 21 2 200watt @ 43Voc 400watts 27 3 150watt @ 20Voc 450watts 31 3 200watt @ 43Voc 600watts 42 4 150watt @ 20Voc 600watts 35* 4 200watt @ 43Voc 800watts 47** 5 150watt @ 20Voc 1000watts Not Recommend 5 200watt @ 43Voc 1000watts Not Recommend * Maximum achievable output on the DC2DC+ unit when using 20Voc Solar Panels will be the approx 35amps. ** Maximum achievable output on the DC2DC+ unit when using 43Voc Solar Panels will be the approx 47amps. ## IMPORTANT NOTE: Estimated Amps Output is quoted based upon PERFECT Solar conditions including Sun Angle, Panel Mounting angle and Orientation to the sun. It needs to be noted that panel performance alters dramatically between Summer and Winter periods and actual performance may be impossible to predict. Click here for this DC to DC Charger with a full wiring kit, including resettable circuit breakers! For In Vehicle & Marine Wiring Diagram, click below: For Towed Vehicle Wiring Diagram, click below: Enerdrive ePOWER 12V 60A AC Fully Automatic Multistage Battery Charger. It is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). 60A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 60A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. PRO TIP: Common accessories to go with this Enerdrive 60A AC to DC charger are the 60Amp , 70Amp & 80Amp breakers. These are available in the Accessory List above to add as optional extras. The Enerdrive ePOWER 2000W 12V Pure Sine Wave. It is astate of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan. The ePOWER 2000W Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board. This inverter is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation. Features Seamless 16A AC Internal Transfer Switch AC RCD/Safety Switch with test button Removable LED Remote Control Display Panel Regulated Pure Sine Wave Output Silent Operation Compact Size for Easy Installation USB Port for charging USB devices PS6 Mode AC Transfer Cable 5 Year warranty New PS Mode ePOWER Enerdrive Inverters with AC Transfer Switch now include the new PS6 mode. AC Transfer Cable Now Included as Standard Now included with all AC Transfer Switch. Inverters is a 4 metre AC lead with molded Male/Female IEC Plugs fitted. This allows the installer to cut the lead and hardwire the IEC plugs directly. This will speed up installation time and eliminate any connection issues within the plug. Simarine Pico+ Display Panel Mount Black. SIMARINE PICO sets new standards for marine battery and tank monitors in fields of design, functionality, connectivity and ease of use. PICO’s display unit is made of a sleek anodized aluminum casing and a thick Gorilla® Glass with Anti-Reflective coating protecting the optically bonded high-contrast 3.5 inch IPS LCD display. It’s water and dust proof and can be mounted both indoors and outdoors. The screen brightness is automatically adjusted with a light sensor. The device is operated by four water tolerant CapSense® touch buttons. The Pico system provides you with a simple overview of all important details regarding your battery (voltage, current, amp hours, battery capacity in%, battery temperature) and also tank level and temperature indications. Specifications: SI-PICO3 Panel Mount Black Bezel Power Source Voltage Range 6-35V Temperature Range -20 – +70°C Operating, WiFi On, 100% Illumination 90mA Operating, WiFi Off, 70% Illumination 35mA Operating, WiFi Off, 0% Illumination 18mA Power Off, logger still active 5mA Current (A) ±0.01A Voltage (V) ±0.01V Amp Hours (Ah) ±0.1Ah SOC – State of Charge (0-100%) ±0.01A Temperature ±0.1 °C/°F Voltage Inputs Range 0-75V WiFi Radio Frequency Band 2.4GHz Dimension (Standalone) 89 x 84 x 10mm Dimension (Panel Mount) 108.5 x 94 x 10mm Connectivity Up to Batteries 6 Shunts 24 Temperature Sensors 10 Tank Level Sensors 14 Inclinometer Sensors 2 Smartphone Applications 1 Logger Capacity Logger Capacity Simarine Battery Shunt 300A 2 x Volt 2 x Resist 1 x Temp. Innovative combination of Shunt and Tank/Temp level module. The SC303 & SC503 are an active combo shunt for PICO battery monitor with; 2 x Voltage Inputs 2 x Tank Level or Temperature Inputs 1 x Socket for Temperature Sensor with JST connector 1 x Current Sensor up to 300A (SC303) or 500A (SC503) for up to 75V systems. It can be used for monitoring current draw of heavy consumers (inverters, bow and stern thrusters, anchor winches) and current generators (shore power chargers and solar panels). Additionally, it allows monitoring tanks for fuel, fresh and grey water. Specifications: SI-SC303 300A Active Shunt Voltage Range 6-35V Temperature Range -20 – +70°C Operating 1.2mA Per Channel – SC303 0.01 – 320A Per Channel – SC503 0.01 – 700A Accuracy ± 0,6 % Resolution 0,01 A Sampling rate 100 ms Continuous – SC303 300A Continuous – SC503 500A Peak current (<1 min) - SC303 400 A Peak current (<1 min) - SC503 700A Peak current (<5 min) - SC303 700 A Peak current (<5 min) - SC503 1000A Voltage drop at 300 A 50 mV Maximum Voltage on Connections 35V Range 0-75V Resolution 1mV Accuracy ±0.2% Sampling Rate 100ms Range 0 Ohm - 65kOhm Accuracy ± 3.0% Range -15 – +80 °C Accuracy (-10 – 60 °C, 14 – 140 °F) ± 3.0% Connectivity Up to Batteries 1 Temperature Sensors 3 Voltage and/or Resistance Sensors 2 SiCOM RJ9 Sockets 2 Dimensions (length x width x depth) 120 x 120 x 60 mm Battery Connection M 10 bolts Simarine by Enerdrive Quad Shunt Mod 4 x 50A Input Current & 1 x Relay Output 1A. SCQ50 is an innovative shunt module for monitoring individual consumers and generators with; 4 x 50A Current Sensors For 12v and 24v Systems Connection Possibilities; Up To 4 x Consumer Devices Up To 4 x Generators Combination of 4 of both 1 x Relay Input Specifications: SI-SCQ50 Quad Shunt 4 x 50A Circuits Module Power Source Voltage Range 6-35V Temperature Range -20 - +70°C Operating 3.5mA Current Measuring Channels 4 Maximum Operating Current 1A Maximum Common Input Voltage 6 – 30V Per Channel 0.01 – 50A Resolution 0.01A Accuracy ± 0.6 % Sampling Rate 100ms Continuous 50A Peak Current (<1 min) 60A Peak Current (<5 sec) 60A Voltage Drop at 25 A 35mV Maximum voltage on connections 35V Connectivity Up To Current Sensors 4 Relay Common Input (COM) 1 Relay Output Normally Open (NO) 1 Relay Output Normally Closed (NC) 1 SiCOM RJ9 Sockets 2 Dimensions (length x width x depth) 182 x 80 x 37 mm Weight 230g . Shop at the best prices and enhance your skills at the same time with this Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine by using the right product for the job. From our Battery Bundles division.
Promotion:

Shop for the best quality tools.

At prices to suit every budget. We are Stockist and Agents for Enerdrive branded products in Australia and have many more great offers on sale for you to choose from.

See Checkout for stock availability

Check Stock

✓ Offered on sale.

TheEnerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine is offered on sale at a special price representing great value.

✓ Proudly Australian owned and operated.

✓ Shipping.

Delivery fees (where applicable) will be calculated based on the size and weight of the item as well as the location of the delivery. The fee will be displayed during the checkout when the post code for the destination is entered.

✓ Generous Exchange Policy.

Exchanges accepted. See checkout for Exchange and Returns detail.

✓ Stock.

Check stock and available now while stocks last. See checkout for details.

✓ Manufacturers Warranty.

All Enerdrive products come with a full manufacturers warranty.

✓ Everyday Specials.<

Big Brands, Everyday Low Prices with Special Discounts on selected items.

See our full range of Enerdrive Products here

---

Name: Enerdrive B-TEC 300Ah Lithium Battery, 40A DC2DC, 60A AC, 2000W Inverter & Simarine
Price: lock in your special price today
Currency: AUD
Stock: Check Stocks

---

Shop with confidence at toolmaster.com.au official stockists of Enerdrive products where only the finest quality tools and equipment are supplied and delivered direct to your door by our wholesale supplier.
We are one of the fast-growing online retailer of DIY, home, garden and outdoor machinery products Australia Wide.
If you are happy with your purchase, tell a friend, if not tell us.

Ref:45738

---