Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery

Order the Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery today and save.

The Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery is is perfect for all trades including the DIY handyman.
Now offered this week throughout Australia at seasonal special discounted price, this guarantees that you always get the best quality tools at the lowest prices.

Now selling at $4549.00

ORDER NOW

Prices are changing daily so see specials today.

See Checkout for stock availability

Disclosure:
Thank you for your support. Please note may earn a small commission on your purchase from our supplier. This does not affect the price in any way.

The Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery is perfect for all trades including the DIY handyman. Biggest Range of the Best Brands from one of Australia’s Leading Online tools and Hardware store.

Now offered throughout Australia at a seasonal discount, this guarantees that you get the best quality tools at the lowest prices.

Specifications:

Get the Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery and save. Enerdrive DIY 40A AC and 40A DC2DC Charging Board with Battery, 5 Year Warranty. Enerdrive DIY 40A AC and 40A DC2DC Charging Board with Battery is perfect for the DIY installer seeking a quality solution at a budget price! This system comprises of the: Enerdrive ePOWER 12V 40A DC to DC Battery Charger EN3DC40+ Enerdrive ePOWER 12V 40A Battery Charger EN31240 ePRO Plus 500A Battery Monitor with Remote Display EN55050 3 Stud Main Negative Bus Bar 40A Low Battery Cutout Main System Circuit Breaker 120A Inverter Circuit Breaker 200A ePOWER DC2DC 60A Output Fuse Connection ePOWER AC Charger 50A Output Fuse Connection 1 x 30A Load Output Fuse Connections Main 6 Circuit “Wedge” Fuse Block with Negative Bus and Cover 12mm Black Plastic Mounting Board. Water & Rot Resistance 175A Anderson Plug (Inverter) 50A Anderson Plug (Solar Input) 50A Anderson Plug (Vehicle Input) Compare all the DIY Installation Kit models below: Items Included eSYS-C eSYS-D eSYS-E eSYS-F eSYS-G eSYS-H eSYS-I eSYS-J K-DIY-Board-2 ePOWER AC 40Amp 230v Charger * * * * * * ePOWER AC 60Amp 230v Charger * * * ePOWER DC2DC 40+ Charger (Vehicle/Solar) * * * * * * * * * Morningstar Tristar PWM-45A Solar Controller * * * ePRO Plus 500A Battery Monitor * * * * * with Remote Display Simarine Pico LCD WIFI Monitoring Screen * * * * Simarine SC303 300A Main Battery Shunt * * * * Simarine SCQ25T Individual Load/Charge Module * * * Simarine SCQ50 Individual Load/Charge Module * * * * 3 Stud Main Negative Bus Bar * * * * * * * * * 40A Low Battery Cutout * * * * * * * * Main System Circuit Breaker 120A * * * * * * Main System Circuit Breaker 200A * * * Inverter Circuit Breaker 200A * * * * * * * * * Solar Input Positive Circuit Breaker 40A * * * * * * Solar Input Positive Circuit Breaker 60A * * * * * * * ePOWER DC2DC 60A Output Fuse Connection * * * * * * * * * ePOWER AC Charger 50A Output Fuse Connection * * * * * * ePOWER AC Charger 70A Output Fuse Connection * * * 1 x 30A Load Output Fuse Connections * * 2 x 30A Load Output Fuse Connections * * * * 50A Load Output Fuse Connection * * 24hr Critical Load 4 Circuit “Wedge” Fuse Block * * * 24hr Critical Load 8 Circuit “Wedge” Fuse Block * Main 6 Circuit “Wedge” Fuse Block * * * with Negative Bus and Cover Main 12 Circuit “Wedge” Fuse Block * * with Negative Bus and Cover ePOWER 2000W AC Transfer Inverter * * Battery Restart Switch (Lithium Batteries) * * * * * 12mm Black Plastic Mounting Board. * * * * * * * * * Water & Rot Resistance 175A Anderson Plug (Inverter) * 50A Anderson Plug (Solar Input) * 50A Anderson Plug (Vehicle Input) * 125Ah B-Tec Lithium Battery * 200Ah B-Tec Lithium Battery * Dimensions 1185L x 380W x 130Dmm 600L x 490W x 100Dmm 600L x 490W x 100Dmm 1185L x 380W x 130Dmm 790L x 380W x 100Dmm 1195L x 380W x 111Dmm 1195L x 380W x 111Dmm 920L x 380W x 111Dmm 580L x 580W x 100Dmm Weight 23kg 14kg 14kg 23kg 16kg 17kg 16.5kg 17kg 14kg (*) Indicates Standard Fitment PRO TIP : Common accessories to go with this canopy system are; one or two AGM Board Cable Kits. Thickness, length & quantity will depend on installation type. Please check products cable description for details. Enerdrive ePOWER 12V 40A DC to DC Battery Charger: Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems. The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. 12V 40A DC2DC Battery Charger Features Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile 40A output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included in charger for more accurate battery charging For In Vehicle & Marine Wiring Diagram, click below: For Towed Vehicle Wiring Diagram, click below: Enerdrive ePOWER 40A Battery Charger: The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). 40A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. Enerdrive ePRO PLUS Battery Monitor: Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C) Supports up to three battery banks (12V, 24V and 48V) Very simple ‘Plug and Play’ installation Perfect integration with Enerdrive DC Modular products The ePRO PLUS is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products. This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4). The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored. The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the QuickLink cable are both included in the package, avoiding the need for a separate connection kit. Shop at the best prices and enhance your skills at the same time with this Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery by using the right product for the job. From our Power Systems division.

Promotion:

Shop for the best quality tools.

At prices to suit every budget. We are Stockist and Agents for Enerdrive branded products in Australia and have many more great offers on sale for you to choose from.

See Checkout for stock availability

Check Stock

✓ Offered on sale.

TheEnerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery is offered on sale at a special price representing great value.

✓ Proudly Australian owned and operated.

✓ Shipping.

Delivery fees (where applicable) will be calculated based on the size and weight of the item as well as the location of the delivery. The fee will be displayed during the checkout when the post code for the destination is entered.

✓ Generous Exchange Policy.

Exchanges accepted. See checkout for Exchange and Returns detail.

✓ Stock.

Check stock and available now while stocks last. See checkout for details.

✓ Manufacturers Warranty.

All Enerdrive products come with a full manufacturers warranty.

✓ Everyday Specials.<

Big Brands, Everyday Low Prices with Special Discounts on selected items.

See our full range of Enerdrive Products here

---

Name: Enerdrive DIY 40A AC and 40 DC2DC Charging Board – Pre Wired, with 200Ah B-Tec Lithium Battery
Price: lock in your special price today
Currency: AUD
Stock: Check Stocks

---

Shop with confidence at toolmaster.com.au official stockists of Enerdrive products where only the finest quality tools and equipment are supplied and delivered direct to your door by our wholesale supplier.
We are one of the fast-growing online retailer of DIY, home, garden and outdoor machinery products Australia Wide.
If you are happy with your purchase, tell a friend, if not tell us.

Ref:45738

---