Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor

Order the Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor today and save.

The Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor is is perfect for all trades including the DIY handyman.
Now offered this week throughout Australia at seasonal special discounted price, this guarantees that you always get the best quality tools at the lowest prices.

Now selling at $3599.00

ORDER NOW

Prices are changing daily so see specials today.

See Checkout for stock availability

Disclosure:
Thank you for your support. Please note may earn a small commission on your purchase from our supplier. This does not affect the price in any way.

The Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor is perfect for all trades including the DIY handyman. Biggest Range of the Best Brands from one of Australia’s Leading Online tools and Hardware store.

Now offered throughout Australia at a seasonal discount, this guarantees that you get the best quality tools at the lowest prices.

Specifications:

Get the Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor and save. Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor, 5 Year Warranty. Pack Included: Enerdrive ePOWER 60amp / 12v Smart Charger – Three Output – EN31260 Enerdrive DC2DC Battery Charger – 12V 40A – EN3DC40 Morningstar TriStar 45 Amp Solar Controller – SR-TS-45-ED Simarine by Enerdrive Battery Shunt 300A 2 x Volt 1 Resist – SI-SC301 6 Circuit Fuse Block – EA-FB-08 Enerdrive ePOWER 12/24V 40A IP66 Smart Battery Guard – EN-LBC1224-40 Fuse holder Circuit Breakers Compare all the DIY Installation Kit models below: PROPERTIES ESYS-C ESYS-D ESYS-E ESYS-F ESYS-G ESYS-H ESYS-I ESYS-J ESYS-K ESYS-L ESYS-M ESYS-O ePOWER AC 40Amp 230v Charger ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ePOWER AC 60Amp 230v Charger ✓ ✓ ✓ ePOWER DC2DC 40+ Charger (Vehicle/Solar) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Morningstar Tristar PWM-45A Solar Controller ✓ ✓ ✓ ✓ ✓ ✓ Enerdrive Epower MPPT 40A Solar Controller ✓✓ ePRO Plus 500A Battery Monitor with Remote Display ✓ ✓ ✓ ✓ ✓ ✓ Simarine Pico LCD WIFI Monitoring Screen ✓ ✓ ✓ ✓ ✓ ✓ Simarine SC303 300A Main Battery Shunt ✓ ✓ ✓ ✓ ✓ ✓ Simarine SCQ25T Individual Load/Charge Module ✓ ✓ ✓ ✓ Simarine SCQ50 Individual Load/Charge Module ✓ ✓ Inverter Breaker 200A (Pre Wired Inverter Supply ✓ ✓ ✓ # Battery Restart Switch (Lithium Batteries) ✓ ✓ ✓ ✓ ✓ ✓ ✓ 24hr Critical Load Distribution Fuse Block ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Main Load Distribution Fuse Block ✓ ✓ ✓ ✓ ePOWER 2000W AC Transfer Inverter ✓ ✓ Dimensions 1185W x 380H x 130Dmm 600W x 490H x 100Dmm 600W x 490H x 100Dmm 1185W x 380H x 130Dmm 790W x 380H x 100Dmm 1195W x 380H x 111Dmm 1195W x 380H x 111Dmm 920W x 380H x 111Dmm 490W x 600 H x 111D mm 490W x 600 H x 111D mm 600W x 350H x 111D mm 600H x 520W x 111Dmm PRO TIP : Common accessories to go with this board are; one or two AGM Board Cable Kits. Thickness, length & quantity will depend on installation type. Please check products cable description for details. NOTE: T his model was previously known as K-AGM-Board-I, now called eSYS-I. Enerdrive ePOWER 60amp / 12v Smart Charger – Three Output The Enerdrive ePOWER 60A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). 60A Battery Charger Features: Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks. Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three. Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3. Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator). Smart Charging: The ePOWER 60A battery charger will regulate its output based on the loads connected to your battery banks. Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz. LED Display: Easy to use “set and select” menu along with scrolling charger status. Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours. Temperature Sensor: Battery temperature sensor included with 3 meter cable. 5 Year Warranty from an Australian company renowned for customer support. PRO TIP: Common accessories to go with this Enerdrive 60A AC to DC charger are the 60Amp , 70Amp & 80Amp breakers. These are available in the Accessory List above to add as optional extras. Enerdrive DC2DC Battery Charger – 12V 40A Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems. The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. 12V 40A DC2DC Battery Charger Features Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger including a specific lithium charging profile 40A output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage Temperature sensor included in charger for more accurate battery charging PRO TIP: Common accessories to go with this DC to DC charger are the 60Amp & 70Amp breakers, also the 3 pre-wired & fused charging cables. These are available in the Accessory List above to add as optional extras, please see the product manual & drawings for the connection. Click here for this DC to DC Charger with a full wiring kit, including resettable circuit breakers! For In Vehicle & Marine Wiring Diagram, click below: For Towed Vehicle Wiring Diagram, click below: Morningstar TriStar 45 Amp Solar Controller The Morningstar TriStar is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. Highest Reliability – Large heat sink and conservative design enables operating at full ratings to 45°C. More Information – Optional meter displays extensive system and controller information, automatic self-test and reset. Displays in 5 languages. Communications Capability – RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control. Fully Adjustable – DIP switch provides user with choice of 7 digital presets. Additional custom settings via RS-232. Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage. Simarine by Enerdrive Quad Shunt 4 x 25A & 4 x Tank Module The SCQ25T is a highly verstaile and innovative combination of shunt, tank interface and voltage module. Its higly innovative shunt module with four inputs for monitoring individual consumer and generator continuous currents up to 25A (35A peak) per input on 12V and 24V systems. Additionally, equipped with four resistance inputs for resistance-type tank level or temperature sensors and three voltage inputs for voltage-type tanks sensors and battery voltages allows wide connection possibilities. That is very convenient for monitoring smaller consumers like refrigerator or generators like solar, wind, hydro or shore power. The current channels can be combined for higher amperage, meaning the continuous currents on the combined channels up to 50A (70A peak) on 12V and 24V volts. SCQ25T’s innovative protected architecture allows wiring in either negative (low) or positive (high) side. Simarine by Enerdrive Battery Shunt 300A 2 x Volt 1 Resist Battery Shunt to suit Simarine Pico Monitors 2 x Volt 1x Resistance Enerdrive ePOWER 12/24V 40A IP66 Smart Battery Guard The ePOWER Low Battery Cutoff protects your batteries from non essential loads before the battery is completely discharged causing damage to batteries and potently denying your engine cranking power. These Low Battery Cutouts also protect connected electrical appliances against over voltage. The voltage load is disconnected whenever the DC voltage goes beyond 16V (12V mode) or 32V (24V mode). Microprocessor Controlled: The ePOWER LBC is microprocessor controlled with 10 different programs that engage or disengage the voltage load over several different voltage paramaters. Features: Overvoltage Protection Ignition proof (no relay, no spark) Delayed alarm output Delayed load disconnect Applications: Recreational vehicles Service vehicles Maritime applications Shop at the best prices and enhance your skills at the same time with this Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor by using the right product for the job. From our Power Systems division.

Promotion:

Shop for the best quality tools.

At prices to suit every budget. We are Stockist and Agents for Enerdrive branded products in Australia and have many more great offers on sale for you to choose from.

See Checkout for stock availability

Check Stock

✓ Offered on sale.

TheEnerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor is offered on sale at a special price representing great value.

✓ Proudly Australian owned and operated.

✓ Shipping.

Delivery fees (where applicable) will be calculated based on the size and weight of the item as well as the location of the delivery. The fee will be displayed during the checkout when the post code for the destination is entered.

✓ Generous Exchange Policy.

Exchanges accepted. See checkout for Exchange and Returns detail.

✓ Stock.

Check stock and available now while stocks last. See checkout for details.

✓ Manufacturers Warranty.

All Enerdrive products come with a full manufacturers warranty.

✓ Everyday Specials.<

Big Brands, Everyday Low Prices with Special Discounts on selected items.

See our full range of Enerdrive Products here

---

Name: Enerdrive eSYSTEM-I 60A AC / 40A DC with TriStar 45A Solar Reg & Simarine Monitor
Price: lock in your special price today
Currency: AUD
Stock: Check Stocks

---

Shop with confidence at toolmaster.com.au official stockists of Enerdrive products where only the finest quality tools and equipment are supplied and delivered direct to your door by our wholesale supplier.
We are one of the fast-growing online retailer of DIY, home, garden and outdoor machinery products Australia Wide.
If you are happy with your purchase, tell a friend, if not tell us.

Ref:45738

---